The drive motor is specially designed for motor-operated ventilation dampers. This device must be mounted directly on the damper shaft. It can only be used for a valve drive for valves up to approx. 1m².
The Belimo motor LM230A-TP is a valve drive with which you can operate the control valve in your ventilation. The Belimo motor is for opening/closing your control valve and is mounted directly on the valve shaft. The damper actuator has a torque of 5 Nm with which you can control a control damper of up to 1m². In a running time of 150 seconds an angle of 90° is reached and the maximum angle of rotation of this motor is 95°.
Valve drive for valves up to approx. 1m²
Torsional torque: 5 Nm
Running time: 150 seconds constant
Maximum rotation angle: 95°
Supply voltage: AC 230V – 50/60 Hz
Control: Open-close or 3-point
Degree of protection: IP 54
Manual adjustment with push button
Control: changeover/closing contacts
Connection: screw terminal with cover IP54
Direction of rotation of your choice (left/right)
Angle of rotation limitation mechanically integrated
The Belimo motor LM230A-TP is a valve drive with which you can operate the control valve in your ventilation. The Belimo motor is for opening/closing your control valve and is mounted directly on the valve shaft. The damper actuator has a torque of 5 Nm with which you can control a control damper of up to 1m². In a running time of 150 seconds an angle of 90° is reached and the maximum angle of rotation of this motor is 95°.
Valve drive for valves up to approx. 1m²
Torsional torque: 5 Nm
Running time: 150 seconds constant
Maximum rotation angle: 95°
Supply voltage: AC 230V – 50/60 Hz
Control: Open-close or 3-point
Degree of protection: IP 54
Manual adjustment with push button
Control: changeover/closing contacts
Connection: screw terminal with cover IP54
Direction of rotation of your choice (left/right)
Angle of rotation limitation mechanically integrated
